Practical Tips for Efficient Irrigation

Depending on the type of crop, the type of soil and the quality of the water, one dripper or another is recommended, here is a brief summary:

2L DRIPPERS> Horticultural and herbaceous | Clay soils | Good quality water

4L DRIPPERS> Trees | Freeland | Medium quality water

8L DRIPPERS > Trees | Sandy land | Low quality water

Contact us for more information.

The DeepDrop® Subsurface Drip Irrigation System installs in 3 easy steps:

1. We make a hole near the plant of about 30 or 40 cm deep. 30 or 40 cm deep. (It may vary depending on the depth of the root of the plant).
2. Insert the pipe with the DeepDrop® washer into the hole you have just made, hiding it with a layer of soil on top of the washer. layer of soil on top of the washer.
3. We take the DeepDrop® dripper and insert the thin hose into the main irrigation pipe. Then we insert the dripper into the base previously inserted into the soil.

Ready!

You already have the system installed.

Watch our explanatory video here.

The DeepDrop® drip irrigation system adapts to the pipes of traditional drip irrigation systems, i.e., 16mm, 18mm or 20mm blind pipes.

DeepDrop® Integrated System fits into pipes with 16mm integrated drippers and adapts to the current irrigation system you have installed.

1. Make a hole
   The first step is to make a hole between 30 and 40 cm. (It will vary depending on the depth of the root of the plant).
2. Insert tube
   Insert the tube into the hole you have just drilled. There should be a gap between the tube and the base of the hole.
3. Encapsulate pipe section
   Take the transparent capsule and the base of the capsule, join both parts in the section of the pipe in which it has an integrated dripper, encapsulating that section. Finally, insert the base of the capsule into the buried pipe.
   

And that’s it! You now have a subway irrigation system with visual control.

Watch our explanatory video here.

DeepDrop® Integrated System fits 16mm dripline with integrated drippers and adapts to your existing irrigation system .

Normally 50% less is watered than what you usually do. In any case, each crop requires specific irrigation depending on the type of plantation, the terrain and even the age of the plant. If you wish, we can advise you personally, contact us.

DeepDrop® is recommended for a wide type of crops such as orchards, trees in general, nuts, shrubs, home gardens, nurseries, etc.

However, it is not recommended for the grass family such as barley, wheat, corn, rice…

The number of drippers you need will depend on the number of irrigation points you currently have installed, which will be replaced by DeepDrop® devices, thus preventing the roots from suffering. If you have any questions, our customer service staff will be happy to answer them. CONTACT.