💧 DESCUENTO DEL -15% 💧 - USA EL CÓDIGO: VERANO26 - OFERTA VÁLIDA HASTA 15-08-2026
*Cupón no acumulable con envío gratuito

Patented irrigation system that converts surface drip irrigation systems to subsurface irrigation.
DeepDrop® System is an innovative patented underground drip irrigation system that saves up to 70% water and eliminates water stress for your plants. It is an easy to install and low cost system that you can adapt to your traditional drip irrigation installation.

Significant savings of 40% to 70% of water with respect to surface irrigation.

Visual control from the surface to check that the water effectively reaches the roots and subsoil.

It provides the strictly necessary irrigation, favouring the growth and production of crops.
Depending on the type of irrigation pipe, you can choose from two different models

DeepDrop® System adjusts to the pipes of traditional surface drip irrigation systems, such as 16mm / 18mm / 20mm blind pipes, adapting to the current irrigation system you have installed, transforming it into a subway irrigation system.

DeepDrop® Integrated System fits into pipes with integrated 16mm drippers adapting to the current irrigation system you have installed, transforming your surface irrigation into a visually controlled subsurface irrigation.
For blind pipes, we recommend the DeepDrop® system with a hose that connects to the hole drilled in the pipe.
The first step is to make a hole between 30 and 40 cm (it will vary depending on the depth of the root of the plant).
Insert the pipe with the DeepDrop® washer into the hole you have just made, concealing it with a layer of soil above the washer. There should be a gap between the pipe and the base of the hole.)
Get the DeepDrop® dripper and insert the thin hose into the main irrigation pipe. Then insert the dripper into the base previously inserted into the soil.
For pipes with integrated drippers, we recommend DeepDrop® Integrated System, which encapsulates the pipe section with the integrated dripper:
Start by digging a 30 to 40 cm hole, adjusting the depth according to the root of the plant.
Connect the base of the device to the tube, insert it into the hole and tighten the rubber to the support. Observe that the water flows correctly.
Place the upper capsule and press it until you hear the “click”. Finally, fill with soil around the device.

At DeepDrop we adapt to your needs. Fill out our form and in less than 24 hours you will receive a custom quote, without obligation. Find out how we can help you today!
Discover how the DeepDrop irrigation system can transform your crop, achieving a return on investment in record time. DeepDrop is the subway irrigation solution that maximizes water use, reduces the use of fertilizers and herbicides, and reduces energy consumption. Investing in DeepDrop not only improves the efficiency of your agricultural production, but also allows you to recover your investment in just a few months.

Consistent resource savings ensure sustainable profitability for your crop.
The DeepDrop® system distributes water directly to the root zone of the plants, minimizing evaporation and runoff losses. By using only the necessary water, consumption is reduced by up to 70% compared to other irrigation systems, generating immediate and continuous savings.
Our system is highly energy efficient. By reducing the frequency and amount of irrigation, the time that pumping systems need to be in operation is also reduced, which leads to significant savings on electricity bills, another factor that shortens the payback time.
DeepDrop® helps to apply fertilizers and nutrients much more efficiently, as water and nutrients are kept close to the root and not dispersed on the surface. By keeping nutrients in the root zone, fertilizer use is reduced, resulting in lower costs and higher yields.
In addition, by keeping the surface area dry, weed growth is inhibited and the proliferation of pests and fungi is reduced, reducing the need for herbicides.



info@deepdrop.es

Avda. Isaac Albéniz 2, Torrox (Málaga)
